Aurora Roof Pros provides professional flat & low-slope roofing in Aurora, IL for residential and commercial properties across the Fox River valley. Half of Aurora's low-slope roofing is not on a commercial building. It is on the back of a worker's cottage, where a summer kitchen, a mud porch or a bedroom addition was tacked onto a steep main roof sometime between 1900 and 1955.
Those rear roofs are their own system and we price them that way. They typically run between a half and two in twelve, they die into a wall or into the steep roof above them, and the transition is where the water actually gets in. A contractor who shingles the back of the house because the front is shingled has just installed a covering below its minimum slope and started a clock.
Our default there is a two-ply self-adhered SBS modified bitumen with a granulated cap, carried up the adjoining wall as a base flashing and terminated under counter flashing rather than behind a bead of sealant. It is walkable, it is repairable, and it tolerates a plank deck that is not perfectly flat, which no rear addition in this city ever is. It is also the only assembly we will put on a plank rear roof without argument.
On larger low-slope areas, and on the flat-roofed 1960s ranches out on the east side, we core-cut before recommending anything. A two-inch plug tells you layer count, whether the insulation is wet, and whether the deck is plank, gypsum or steel. Recommending a system without that plug is a guess, and it is the guess that produces most of the tear-offs that go badly.
Where the deck is sound and the layers are few, fully adhered EPDM or a 60-mil TPO over a half-inch high-density cover board is a thirty-year answer. Where the substrate is old plank, adhered assemblies behave better than mechanically fastened ones, because plate fasteners into hundred-year-old boards do not hold the way a data sheet assumes they will. Those sheets assume a substrate this city very often does not have.
Drainage gets designed rather than inherited. Tapered insulation to a defined fall, crickets behind any curb wider than two feet, and a scupper or drain sized for the area it serves. On a rear addition in the flood hazard area we also look at where the water lands, because a downspout aimed at a foundation is a basement problem waiting for the next April.
Our licensed and insured team brings the right materials and equipment to every job — laminated fibreglass shingles meeting ASTM D3462 at six nails per shingle, 1x6 square-edge board sheathing with skip gaps over rafters at 24 inches, double-lock standing seam formed on site from 24-gauge steel coil, granulated cap sheet carried up the adjoining wall as a base flashing, step flashing woven course by course into soft common-brick sidewalls, chimney taken down below the deck line with a framed and sheathed infill — and backs the work with a written workmanship warranty. We serve Aurora and nearby communities including North Aurora, Montgomery, Oswego, Yorkville.
What We Handle
Everything our flat & low-slope roofing in Aurora covers
One crew, one point of contact, and the full range of flat & low-slope roofing work in Aurora, IL. If it is on this list we do it in house rather than handing it to a subcontractor:
- flat roof repair aurora il
- low slope roofing aurora illinois
- flat roof replacement aurora il
- tpo roof aurora illinois
- epdm rubber roof aurora il
- modified bitumen roof aurora
- porch roof repair aurora il
- rear addition flat roof aurora
- flat roof contractor kane county
- torch down roofing aurora il
- low slope roof kendall county
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Aurora services.
Materials, equipment and how we do flat & low-slope roofing
The difference between flat & low-slope roofing that lasts and flat & low-slope roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with laminated fibreglass shingles meeting ASTM D3462 at six nails per shingle, 1x6 square-edge board sheathing with skip gaps over rafters at 24 inches, double-lock standing seam formed on site from 24-gauge steel coil, granulated cap sheet carried up the adjoining wall as a base flashing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Aurora job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the Fox River valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do flat & low-slope roofing outside Aurora
Aurora Roof Pros covers Aurora and the surrounding communities of the Fox River valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Flat & Low-Slope Roofing in North Aurora, IL — Kane County, population 18,261
- Flat & Low-Slope Roofing in Montgomery, IL — Kane County, part in Kendall County, population 20,262
- Flat & Low-Slope Roofing in Oswego, IL — Kendall County, part in Will County, population 34,585
- Flat & Low-Slope Roofing in Yorkville, IL — Kendall County, population 21,533
- Flat & Low-Slope Roofing in Batavia, IL — Kane County, part in DuPage County, population 26,098
- Flat & Low-Slope Roofing in Geneva, IL — Kane County, population 21,393
Start on the Aurora Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Aurora Chooses Aurora Roof Pros
- ✓We read the Fox River flood map for your address before we price anything, because inside the mapped hazard area the city counts what you spend on the building and that count has a ceiling.
- ✓Every estimate states in one line whether we treat the work as maintenance, repair or improvement, and shows the figure against the structure's assessed improvement value.
- ✓On the low-lying older neighbourhoods we quote staged replacement by slope, so a house does not trip the fifty percent rule in a single season.
- ✓We refuse tile conversions on 1990s truss framing without a structural engineer's letter, and we say so before you have paid anyone for a design.
The standards behind flat & low-slope roofing
Quality here is not a matter of opinion — it is written down. The flat & low-slope roofing work we do in Aurora follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every flat & low-slope roofing project in Aurora gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free flat & low-slope roofing free estimate in Aurora, or request a quote and we'll get right back to you.